Tom's main instrument is a custom made Suhr Standard 22 fret guitar.

Here are the specs : -

Basswood Body
3/16 Flame Maple Top
Quartersawn 1 Piece Maple Neck (Even C Slim .800-.880) with 16" Radius
Tusq Nut
Jumbo Stainless Steel Frets
Gotoh 510 2-Post Solid Steel Saddles Bridge with Steel Block
Chrome Hardware
Sperzel Locking Tuners
H/S/S Pickup Config
Bridge = SSV+ Humbucker ) Split via Push/Pull Volume Knob
Middle = ML Single Coil
Neck = ML Single Coil
Trans Blue Denim/Slate Finish with Scraped Binding
Abalone Face, Side Dots and Logo
10-46 Gauge Elixer Nanoweb Strings
Buzz Feiten Tuning System







Tom's other Suhr is a new Suhr Classic for July 2011. 

Here's the specs: -
Light Weight Alder Body
Roasted Museum Grade Birdseye Maple Neck (D Slim profile) with compound 10-14" Radius
Tusq Nut
Jumbo Stainless Steel Frets
Gotoh 510 2-Post Solid Steel Saddles Bridge with Steel Block
Chrome Hardware
Sperzel Locking Tuners
S/S/S Pickup Config
Bridge = ML Single Coil
Middle = ML Single Coil
Neck = ML Single Coil
Sonic Blue Finish with White Scratch Plate
Abalone Face, Side Dots and Logo
10-46 Gauge Elixer Nanoweb Strings
Silent Single Coil System


These are truly incredible guitars and you can check them out at :-

www.suhrguitars.com

Handwired and assembled in Spokane, Washington, Toadworks pedals are amazing tone machines with an image and sound all of their own. Tom uses a wide selection of their range including the following : -

Fat City Overdrive Pedal
Lil Leo Overdrive Pedal
John Bull Overdrive Pedal
Texas Flood Overdrive Pedal
Redux Delay Pedal - officially the best delay pedal ever!!
Barracuda Analogue Flange Pedal
Meat jnr Boost Pedal
Enveloope Dynamic Loop Pedal

You can check out these fantastic effects at : -

www.toadworksUSA.com

Tom uses a Port City Pearl 50w Hand Wired Head, a Sahana 45w Head, OS 2x12 Wave Cab with Cannibis Rex Speakers and a 1x12 Wave Cab with Celestion G12-H65 Speaker.

The Port City Pearl features:

• Volume, treble, middle and bass controls
• Bright switch
• 2 - JJ 6L6 power tubes
• 3 – ECC83, 82 and 81 JJ preamp tubes
• 50 watts
• JJ GZ34 Rectifier
  

The Port City Pearl is handmade in North Carolina using only the highest quality components such as Mojo Dijon capacitors, carbon film resistors, custom USA made transformers, PVC coated copper wire and Switchcraft jacks. The Pearl head enclosure is crafted from ¼" inch finger jointed solid pine.

The Port City Sahana features:

• 2 x EL34, 3 x 12AX7
• ¾ in. solid pine cabinet (Finger jointed) covered with heavy duty tolex covering
• Aluminum chassis
• Cliff and Switchcraft brand jacks
• Solid metal shaft Alpha potentiometers
• Premium carbon film resistors
• Custom wound Heyboer output transformer, power transformer, and choke
• Military grade switches
• Metal footswitch included

Check out:-

www.portcityamps.com

Tom uses the Wampler Ecstasy and Paisley Drive on his pedal board. These boutique overdrive pedals are made in the USA by Brian Wampler and represent the pinnacle of sound quality and tone production.

Check them out at: -

www.wamplerpedals.com

Tom also endorses: -
IQS Strings - Finest strings from Italy
www.iqsstrings.com
Reference Cables - Superb Cables
http://www.referencelaboratory.com/
Timbertone Jazztone Picks - Great picks from the UK
http://www.timber-tones.com/

Tom also uses Blackstar Amps, TC Electronics Effects, Carl Martin Effects, George L's Cables, V-Picks (Medium Pointy), Elixer Nanoweb Strings, Logic Pro, Spectrasonics Plugins and Apple Hardware.